DigiFlag manual

PRO

Up to four LED panels like the real ones: flags, gear with RPM lights, cars alongside and more. A PRO plan overlay of Raptor Racing Overlay.

Each panel is a 16 x 16 grid of LEDs. You choose what it shows.

In Automatic it shows the gear and covers it with whatever matters most at that moment.

It only reads iRacing: it never changes anything on your car.

DigiFlag manual 1 2 3 4 5

Three DigiFlags: Automatic, Gear with RPM lights and Cars alongside.

  1. 1Automatic: whatever matters most right now. Here, the blue flag.
  2. 2The RPM line: fills from green to red.
  3. 3The gear: blinks red from the shift point.
  4. 4Cars alongside: you in gray, the others in red.
  5. 5The housing: its opacity and the LEDs' opacity are set separately.

What each thing looks like

One panel per flag or function. Anything that blinks is shown here at one instant.

Green
GreenStart or restart. Shows for 5 seconds.
Yellow
YellowDanger ahead.
SC
SCFull-course yellow: safety car.
Blue
BlueA faster car is catching you.
White
WhiteLast lap.
Checkered
CheckeredThe session is over.
Red
RedSession stopped.
Black
BlackYou have a penalty.
Black with orange circle
Black with orange circleDamage: pit to repair.
Gear
GearWhite number and the RPM line filling up.
Shift point
Shift pointThe number blinks red: shift.
Cars alongside
Cars alongsideOne on each side of your car.
PIT LIM
PIT LIMIn the pits with the limiter on.
Start lights
Start lightsThe start, about to go.
Engine warnings
Engine warningsHere, water temperature.

From 1 to 4 panels

  • By default there is one, in Automatic.
  • Each one is a separate window: its own function, size, place and opacities.
  • To add one: right click and «Add a DigiFlag», or HOW MANY DIGIFLAGS in the GENERAL tab.
  • The new one appears to the right of the last one. It comes with Flags, the next one with Cars alongside and the fourth with Gear with RPM lights.
  • To remove one: right click on it and «Remove this DigiFlag». One always stays.

What each panel can show

Automatic
Whatever matters most right now. If nothing is going on, the gear.
Flags
Only the flags. With no flag, it stays dark.
Gear with RPM lights
The gear, with the RPM line on top.
Gear only
Just the number, bigger.
Cars alongside
One or two cars on each side.
Pit limiter
PIT LIM or NO LIM. Only on pit road.
Start lights
The start lights.
Engine warnings
Engine off, water temperature, oil pressure and temperature, fuel pressure.
Class position
A P and your position in your class.
Delta to best lap
Green with an arrow down: faster than your best lap. Red with an arrow up: slower.
Fuel
A 10-LED tank: the laps you have left. Blinks under 2. Shows after your first full lap.
Lap number
LAP and the current lap.

Automatic: what beats what

If several things happen at once, the highest one shows:

  • Black, black with orange circle or disqualification
  • Red
  • Checkered
  • A car alongside
  • Blue
  • Yellows: SC, yellow and debris on track
  • White, black flag warning, 10 and 5 to go
  • Green (5 seconds) or 1 to green
  • Pits: PIT LIM or NO LIM
  • Start lights
  • If there is nothing: the gear

The other flags and warnings

Waving yellow or SC
The yellow alternates its two halves; the SC blinks.
Debris on track
Red and yellow stripes.
Black flag warning
White frame and half the panel white, diagonally.
Disqualification
White frame and DQ in red.
1 to green
Green frame and a white 1.
10 and 5 to go
The number, with squares below. Shows for 5 seconds.
NO LIM
In the pits without the limiter: red frame, blinking.
Start lights
Red, then red and amber, and green to go.

The gear

  • The RPM line fills from left to right: green, yellow and red.
  • The number is white and blinks red from the shift point, with every car.
  • At the top it blinks twice as fast and the line turns blue.
  • N in green, R in amber.
  • It uses your car's shift lights in iRacing. If it has none, the redline.
  • In Automatic, «RPM lights on the gear» picks the gear with the line or the number alone. It comes on.

When it shows

  • By default, only while driving on track.
  • In WHERE IT SHOWS you can add the garage and replays.
  • With nothing to show, the panel keeps its LEDs off, or hides if you pick «Only when it shows something» (below).
  • Off track (Ctrl+S or move mode), each panel shows a sample of its function, so you can place it.
  • Also on your phone (all panels) and in OBS with Streaming (DigiFlag 1).

Hide it until it has something

In each panel's tab, WHEN IT APPEARS. Also on right-click, When it shows.

WHEN IT APPEARS
Always
Default. Always visible.
Only when it shows something
Hides while it has nothing to say.

With Only when it shows something, it shows up:

  • Flags: with a flag out.
  • Cars alongside: with a car next to you.
  • Pit limiter: in the pits.
  • Start lights: at the start.
  • Engine warnings: with a warning.
  • Fuel: with less than 2 laps.
  • Automatic: only with a warning. It hides when it would go back to the gear.
  • Gear, Class position, Delta and Lap number: while there is data.

It shows up at once and hides after 2 seconds. In move mode it is always visible.

Controls and settings

  • On the overlay: with «Allow moving the overlay» you drag it. In move mode (Ctrl+M from the menu) each panel moves on its own and grows or shrinks by pulling a corner.
  • Right click on a panel (changes only that panel): What it shows, When it shows (Always or Only when it shows something), RPM lights on the gear, Overlay size (Bigger, Smaller, or 60, 80, 100, 130 and 160%), Housing opacity (opens two sliders: housing from 0 to 100% and LEDs from 20 to 100%), Add a DigiFlag, Remove this DigiFlag, Also show it in the garage, Also show it in replays, Allow moving the overlay and Close the DigiFlag.
  • In the Raptor Racing Overlay menu, GENERAL tab: HOW MANY DIGIFLAGS (1 to 4), Allow moving the overlay by dragging it, AUTOMATIC (the order above), WHERE IT SHOWS (Garage and Replays) and SEE IT ON YOUR PHONE.
  • DIGIFLAG 1 to 4 tabs, one per panel: WHAT IT SHOWS, RPM lights on the gear, WHEN IT APPEARS, SIZE (60 to 160%), BACKGROUND OPACITY (the housing) and DATA OPACITY (the lit LEDs). A panel that is not on can be left ready.

Tips

  1. To start, one in Automatic is enough.
  2. If your wheel already shows the gear, use Flags or Cars alongside.
  3. Put it near where you look: you read it out of the corner of your eye.
  4. If the housing covers the track, lower BACKGROUND OPACITY: the LEDs stay the same.